In today’s market, owning a high-efficiency wall saw machine is a must for handling large-scale reinforcement projects. This equipment does not just handle reinforced concrete up to 73cm thick; it ensures the cutting edges are as smooth as a mirror.
Compared to traditional handheld tools, a diamond wall saw uses a track-mounted system. This means higher precision and much lower physical labor. Typically, a concrete wall saw cutting machine works 5 to 8 times faster than manual methods.
Technical Parameter of Wall Saw Machine
| Hydraulic Oil Pump | Model | YG 600 | YG 700 |
| Max. power | 25KW | 30KW | |
| Motor cooling method | Air cooling | water cooling | |
| Rated voltage | 380V 50HZ | 380V-420V 50HZ-60HZ | |
| Pressure stages | 3 | 3 | |
| Max. operating pressure | 200bar/20Mpa | 210bar/21Mpa | |
| Oil flow rate | 30-80L/min | 40-100L/min | |
| Dimensions | 600mm*650mm*1050mm | 500mm*520mm*1100mm | |
| Weight | 220kg | 140kg | |
| WallSaw | Saw blade diameter range | 800-1400mm | 800-1600mm |
| Cutting depth | 620mm | 730mm | |
| Max. working pressure | 180bar/18Mpa | 200bar/20Mpa | |
| Max. oil flow rate | 100l/min | 100l/min | |
| Gearing | Gear | Gear | |
| Rotation speed | 450/950/1300Rpm | 450/850/1200Rpm | |
| Dimension | 400mm*420mm*400mm | 400mm*420mm*400mm | |
| Weight | 38kg | 39kg |
Why Choose a High-Frequency Wall Saw Machine?
High-frequency wall saw machine units are becoming the industry standard. Our 17KW version is built for contractors who need speed and portability without sacrificing power.
- Strong Power: The 17KW motor handles heavy rebar with ease.
- Dual Voltage: Switch between 220V and 380V to fit any job site.
- Lightweight: One person can finish the track installation.
- Remote Control: A 30m wireless range keeps operators away from dust and falling hazards.
Pro Tip: Always ensure a steady water flow during cutting. Water does more than cool the motor; it flushes out slurry to prevent the blade from jamming.
Wall Saw Machine Industry Applications and Field Cases
The use of a wall cutting saw spans across residential retrofitting to heavy industrial demolition.
- Infrastructure: Cutting crash barriers in highway expansions or replacing bridge bearings.
- Underground Work: Creating openings for subway stations or modifying bunker structures.
- Commercial Renovation: Cutting elevator shafts or large window openings in facades.
Success Story: Bridge Reinforcement in South Africa
Mr. Thabo, a contractor in South Africa, managed an old bridge renovation. He needed to remove 45cm thick reinforced concrete railings. Initially, he used heavy hydraulic gear, but it was too bulky for edge-of-bridge work. He switched to our 17KW wall saw machine. Because of the modular design, his team finished the setup in 15 minutes. Using the 30m remote, the operator stayed safe on the bridge deck. The project finished 10 days early, saving $5,000 in labor costs.
Maintenance: Extend the Life of Your Gear
Using a wall saw machine long-term requires attention to detail. After every workday, wash the tracks and saw head with clean water. This prevents concrete slurry from hardening. Also, check gear oil levels regularly. This ensures the motor runs smoothly under high loads.
If you need to cut irregular stones or structures thicker than 73cm, we suggest a wire saw. However, for standard flat walls, this track-mounted wall saw machine is the most precise and cost-effective choice.
Wall Saw Machine FAQ
Yes. With a high-quality diamond wall saw blade, it easily cuts through dense rebar over 32mm in diameter.
Our 17KW model features an intelligent inverter. It adjusts automatically between 220V single-phase and 380V three-phase power.
In standard concrete, one blade usually lasts for 100 linear meters. The cost per meter is very low compared to the project value.
Ready to change how you cut? YG Machinery offers factory-direct wall saw machine solutions for global markets. Contact us for a quote today!
