In today’s construction market, choosing the right cutting tool dictates your profit margins. The diamond wall saw has become the gold standard for handling reinforced concrete, brick walls, and stone materials.
Unlike traditional destructive hammering, using a concrete wall saw cutting machine ensures non-destructive structure protection and one-time forming. This saves about 40% in labor costs and significantly shortens the project timeline.
Technical Parameter of Diamond Wall Saw:
| Hydraulic Oil Pump | Model | YG 600 | YG 700 |
| Max. power | 25KW | 30KW | |
| Motor cooling method | Air cooling | water cooling | |
| Rated voltage | 380V 50HZ | 380V-420V 50HZ-60HZ | |
| Pressure stages | 3 | 3 | |
| Max. operating pressure | 200bar/20Mpa | 210bar/21Mpa | |
| Oil flow rate | 30-80L/min | 40-100L/min | |
| Dimensions | 600mm*650mm*1050mm | 500mm*520mm*1100mm | |
| Weight | 220kg | 140kg | |
| WallSaw | Saw blade diameter range | 800-1400mm | 800-1600mm |
| Cutting depth | 620mm | 730mm | |
| Max. working pressure | 180bar/18Mpa | 200bar/20Mpa | |
| Max. oil flow rate | 100l/min | 100l/min | |
| Gearing | Gear | Gear | |
| Rotation speed | 450/950/1300Rpm | 450/850/1200Rpm | |
| Dimension | 400mm*420mm*400mm | 400mm*420mm*400mm | |
| Weight | 38kg | 39kg |
Why Power Systems Dictate Your Daily Efficiency?
There are three main power types for a wall saw machine: High-frequency, Hydraulic, and Electric.
- High-Frequency Saw (17KW/20KW): This is our top recommendation. It is lightweight yet powerful. It fills the gap between heavy hydraulic units and low-power electric saws.
- Hydraulic Wall Saw (600TM/700TM): Best for extremely harsh environments. It uses a hydraulic motor for high torque, reaching a maximum cutting depth of 73cm.
- Basic Electric Saw: Often limited to 7KW. These are only suitable for low-intensity, simple residential cutting.
Expert Tip: If you are a professional demolition contractor, the 17KW high-frequency model is the “Value King.” It supports both 380V and 220V voltage switching.
Key Data: Performance Metrics You Must Know
| Feature | High-Frequency Saw (17KW) | Hydraulic Saw (700TM) |
| Max Cutting Depth | 51cm – 62cm | 73cm |
| Cutting Speed (Concrete) | 2-3 meters/hour | 3-5 meters/hour |
| Control Mode | 30m Wireless Remote | Manual/Remote Optional |
| Protection Level | Advanced Controller | IP65 Waterproof |
We found that cutting granite is 2-3 times faster than concrete. However, for a 50cm depth in reinforced concrete, expect a steady 2 meters per hour.
Diamond Wall Saw Application Scenarios and Industry Use Cases
The use of a concrete wall cutting saw goes far beyond just making windows.
- Building Renovation: Cutting elevator shafts without damaging the main structure.
- Infrastructure: Bridge pier cutting, dam reinforcement, and foundation removal.
- Industrial Use: Installation of ventilation ducts and dismantling underground bunkers.
Success Story: Demolition in Mexico
Mr. Alejandro from Mexico needed to cut 50 ventilation openings for a shopping mall renovation. The walls were 25cm thick heavy reinforced concrete. Initially, he used handheld cutters with zero progress. After switching to our diamond wall saw (17KW high-frequency), he achieved a pace of 6-8 openings per day. Since the machine matched his local voltage requirements, he avoided buying expensive transformers. The project finished two weeks early.
Maintaining Your Wall Saw Machine
To keep your diamond wall saw running at peak performance, follow these simple rules. First, always use water. The motor generates intense heat at high RPMs. Connecting a simple water pipe to the inlet prevents motor burnout and suppresses dust.
Second, check your rails. This wall saw machine requires a flat surface to fix the guide rails. If you are dealing with irregular rocks, we recommend using a diamond wire saw instead.
Diamond Wall Saw Q&A
Typically, one high-quality blade cuts 15-20 square meters (approx. 100 linear meters). Efficiency depends on concrete hardness and rebar density. Always keep 2-3 spare blades on site.
Yes. Our high-frequency models feature a split-type design. One person can handle the installation and use the wireless remote for safe, visualized cutting.
For standard wall saws, the limit is 73cm (Hydraulic 800TM). If you need to cut deeper than 73cm, you should switch to a diamond wire saw cutting.
Ready to upgrade your fleet? YG Machinery provides complete diamond wall saw solutions tailored to your local voltage and depth requirements. Contact us today for a factory-direct quote.
